Learn the Basics of Guitar Strings

Main Content Add comments

Guitar strings can be quite puzzling.  Browse this information to learn all about them.

In most cases there are 2 varieties of guitar strings that are created.

Steel – utilized on electric in addition to acoustic guitars

Nylon – primarily used on classical and flamenco guitars

Guitar strings are typically wound together with either kind of nickel, brass, or copper metal. On most common sets of strings for an electric guitar, the 1st – 3rd string is usually unwound, however the 4th – 6th string is wound. Each single string is of a various thickness, and they each have a particular note to be tuned to. The 12 string guitar is the exemption to this, since they have 12 strings to tune instead of six.

Electric guitar strings that are wound are produced by rolling a string made of white metal around a centrally situated string. The various types of material used for covering around the central string depends on the strength and pitch wanted by the music performer. Typically you will find that an electric guitar uses a nickel or nickel alloy substance.

The fullness of the string is referred to as the gauge of the string. The guitar string is measured by fractions of an inch.

Light Gauge String

(.008 – .038) (.009 – .042) (.009 – .046) (.010 – .046)

Easier to press down, and you will be able to bend them easily.

Makes it possible for you to be able to play significantly more rapidly

Do not hold their tune adequately

Have very little sustain

Produce  very little sound level

Not good for lower tunings

Heavy Gauge Strings

(.011 – .050) (.010 – .052) (.012 – .052) (.013 – .056)

Heavier gauged strings are preferred by many of todays guitarists by reason of the tone and the feel of them.

Good for guitar players that prefer to have their guitars tuned down lower than typical (drop D, drop C, drop B etc.).

Will maintain their support considerably longer in the drop tunings

Why Your Strings Break

As frustrating as it is, an individual may have guitar strings crack on you, and there are many reasons for this to happen. Here are the 4 main causes that you may experience this problem:

Hyped-up Playing

- This happens to be the most typical reason for splitting strings

- No doubt, you will get so deep into your jam session, that you will tend to strum a little to hard with your pick and snap a string. However there is no way to fix this problem other than change your playing style, but I don’t recommend that at all.

Old Strings

- Over time your guitar strings will loose their elasticity simply from the constant stress that is put on your strings.

- If you have not played or changed your strings in a extended period, they will corrode over, and grow to be very susceptible to breakage.

Over tuning

- This simply means that when you are tuning your guitar, a person may wind the tuning pegs to high, causing a busted string.

- Because this could very easily happen, it is wise to tune your guitar with the strings facing away from you.

Sharp Objects

- You may find razor-sharp areas on the guitar that are capable of splitting a guitar string. These areas include but are not restricted to: The bridge, the nut, tuning peg.

Guitar strings are the heart and soul of any guitar. Without having them, there would be no possible way to create music. To get the best sound out of your guitar, you should change your strings on a regular basis. This is an easy way to experiment and try out various gauges to see what tone suits your style.

Visit our website for more information about professional audio equipment.

Be Sociable, Share!
Leave a Reply

You must be logged in to post a comment.

Entries RSS Comments RSS Log in